Hello I'm Chris Walsh and I know how it feels to want your tracks to have that industry sound & stand up against the songs on the top charts, but at a reasonable Price. I am so confident that I can bring you the industry sound been All First Time Clients 75% off my Rate and guarantee 100% satisfaction!! CLICK Contact Now For the DEAL!!!!
Hello, I'm Chris Walsh, a Canadian artist & mixing And mastering engineer. I've been working out of my beautiful home studio for the past 5 years, I've also worked at one of the biggest studios in Toronto. For years I've studied the techniques and styles of the engineers that work on all your Favourite billboard hits. I may not have big name credits but my sound quality speaks for itself. I'm so confident in my work, that for your first mix & master I will take 75% off my usual rate. Let's get started today and have you on your way to the Industry Sound.
Click the 'Contact' above to get in touch. Looking forward to hearing from you.
1 Reviews
Endorse Chris Walsh (Industry Sound)
Interview with Chris Walsh (Industry Sound)
Q: What other musicians or music production professionals inspire you?
A: Andrew Scheps and his techniques and style of mixing is what inspired my Workflow and pro tools set up. I also love the work of Manny Mariquin, Chris Lord Alge and Tony Maserati; I use countless plugins from them on a daily basis.
Q: What questions do customers most commonly ask you? What's your answer?
A: They ask how they can sound like so and so, I will Listen to the record and see what they might be doing.
Q: What's your strongest skill?
A: Hard work and willingness to be patient until the job is done right. I am flexible and good at communicating to find out what the artist wants.
Q: What's your typical work process?
A: Starting from ground up. First Editing removing breaths etc., Vocal Comping, Pitch correction and all of the small detail work. Then I work in broad strokes, Level out the instrumentation with the vocals and then begin to build the character and feel to the mix.
Q: Describe the most common type of work you do for your clients.
A: A Mix and Master On A 2 track instrumental or stems , with approximately 10-35 audio files. I will do everything needed from comping, tuning & editing to Vocal Production & effects
Q: If you were on a desert island and could take just 5 pieces of gear, what would they be?
A: Condenser mic, good studio headphones, Apollo Twin, Monitors, waves Gold Bundle
Q: Tell us about your studio setup.
A: Ns 10's and a Yamaha hs8 sub, Neumen U-87 main mic, Warm audio U - 87 & Audio Technica 4050 as my backup mic's. I use an Apollo x16 as my interface & preamp tracking through the Neve 10 73 emulation.
Q: What's your 'promise' to your clients?
A: That I will not stop till they are satisfied.
Q: What questions do you ask prospective clients?
A: What are some of your favourite artists in the industry that you feel have really quality mixes that i could reference for your song?
Q: How would you describe your style?
A: New age sound with character and inspiration from the past.
Q: What type of music do you usually work on?
A: Rap, R&B and Pop But have experienced working on everything from rock to a saxophone piece
Q: Can you share one music production tip?
A: You have to add seasoning to any good recipe, spice it up with ear candy, beat cuts, vocal screws, harmonies ect
Q: What do you bring to a song?
A: Quite Simply The Industry Sound. Overall Smooth and thick Vocals And a Even Balance in the frequency spectrum
Q: Is there anyone on SoundBetter you know and would recommend to your clients?
A: Yes but from what I've seen, the rates are too high for today's world. A mix and master on a record with 30 or less audio files shouldn't be costing $300.
I was the Mixing, Mastering & Singer in this production
- Mixing EngineerAverage price - $100 per song
- Mastering EngineerAverage price - $50 per song
Mix & Master Pro 30 or less audio files - $100 (editing, tuning, ect all included)
Mix & Master Pro Unlimited audio files - $250 (editing, tuning, ect all included)
- Yamaha Ns 10's & Sub
- Apollo x16
- Neumann U-87
- Acoustically Sound Control Room
75 % Off For All First Time Customers
