Clients released on: Afterlife, Drumcode, Atlant, Bedrock, Black Hole, CLR, DNB Allstars, Filth On Acid, Non Series, Odd One Out, Ovum, Polegroup, R&S, Second State, Soma, Toolroom, Tronic and many more.
Hi, I’m Rob Hes, an audio engineer, producer, and label owner with over 25 years of experience, specializing in Techno. If you’re aiming for a tight, powerful, and commercial-sounding release, you’ve come to the right place.
*** NEW GIG ***
Are your kick and bass lacking punch or clashing in the mix? With this gig, I'll transform your raw kick and bass stems into a tight, powerful low-end that hits hard and sits perfectly in your mix.
What you get:
* A processed kick stem (crisp, punchy, and defined)
* A processed bass stem (deep, clean, and balanced)
* A bonus grouped kick+bass stem (pre-mixed, ready to use)
Efficiency is key. My typical turnaround time is 1-2 days, so you can kick off your project without delay. Here’s what I offer:
-Mastering Only: $35
-Kick and Bass mixing: $50 (up to 4 stems)
-Stem Mastering: $100 (up to 6 mixed stems)
-Mixing & Mastering: $250 (unlimited stems)
Before Sending Files (For Mastering) – Please Read:
-Submit uncompressed WAV/AIF files (24-bit, 44.1kHz).
-Leave at least -6dB of headroom and clear your master fader before exporting.
-Avoid sending MP3s unless WAV files are unavailable.
Start your project today and let’s take your music to the next level!
Click the 'Contact' above to get in touch. Looking forward to hearing from you.
Credits
175 Reviews - 43 Repeat Clients
Endorse Rob Hes
check_circleVerifiedEvery time i work with Rob his really helpful, super responsive and provides a great sounding master, highly recommend!
check_circleVerifiedNice work by Rob. There is magic in his sound treatment. His customer service id great
- check_circleVerified
Another one boxed off with Rob and as usual it was absolutely spot on mastering service and attention to detail. Thank you Rob.
- check_circleVerified
perfect mastering
- check_circleVerified
Always a great sounding mastered track from Rob, highly recommend him!
- check_circleVerified
6 out of 5 stars if I could give. As always, brilliant work and communication from Rob 👍
check_circleVerifiedRob is not only very talented but also a very nice guy!
It was a pleasure working with him from beginning to end.
True pro!- check_circleVerified
Robs Master are really on point! I can only recommend
- check_circleVerified
Rob is definitely a wizard. Heis not only very friendly but also brings each sound in your track to life.
I would recommend him 100% for my fellow electronical music producers that work on a budget . Cheers. 
check_circleVerifiedPerfect, as always !
- check_circleVerified
<3
- check_circleVerified
Nice work, serious and precise mastering !
- check_circleVerified
I have been working with Rob for over a year now on masterings, great value and relationship! Can't recommend more;)
- check_circleVerified
Clear communication, high quality mastering! Rob helped me a lot!
- check_circleVerified
I always refer to Rob to master my tracks, amazing value and quality ;)
- check_circleVerified
Working with rob was a pleasure, he delivered a well balanced excellent master / mix that exceeded my expectations. Highly recommended and will definitely be working with him again.
check_circleVerifiedalways does a great job
- check_circleVerified
I've asked Rob for masterings since 2 years, always received top quality masters, couldn't recommend more!
- check_circleVerified
Fast communication and high quality master. Thanks a lot!
check_circleVerifiedAnother fantastic master from Rob.
Interview with Rob Hes
Q: Which artist would you like to work with and why?
A: Adriatique, Patrice Baumel, Stephan Bodzin, Mind Against, Maceo Plex, Wehbba, Architectural, Colyn, Denis Horvat. Why? Because they inspire me ;-)
Q: What's your 'promise' to your clients?
A: I always have unlimited FREE revisions! We will keep working until the track is 100%. Masterings will be ready in 1-3 days.
Q: What advice do you have for a customer looking to hire a provider like you?
A: You always have to think outside the box. There are so many producers....how can I stand out. Years ago I also send my demos to mastering engineers so my demo couldn't sound any better :) Make the difference!
Q: What was your career path? How long have you been doing this?
A: Started 23 years ago in the Dutch hardcore scene (gabber), from there I went in to harder techno -> melodic techno what I do now. You can check my Spotify or soundcloud: Rob Hes Or check out my label: Pursuit
Q: Can you share one music production tip?
A: Making hours is the magical tip. Believer in yourself, work hard. And try to make 10.000 hours in your studio. When you stuck/writers block: Go have fun on YouTube, there is so much to learn :)
Q: What type of music do you usually work on?
A: Melodic House & Techno, Techhouse, Techno, Minimal, Afro House, EDM, leftfield house & techno, trance
Q: What's your strongest skill?
A: I'm working for over 20 years in the dance scene. From Techno to Deep House and from Hardcore to Melodic Techno. I know what the labels want to hear and make your song better.
Q: What do you bring to a song?
A: I will give the song that little extra, that little push to make it sounds better.
Q: What other musicians or music production professionals inspire you?
A: There is a long list of producers who inspire me. But let me try to name only a couple: Adriatique, Patrice Baumel, Stephan Bodzin, Mind Against, Maceo Plex, Wehbba, Architectural, Colyn, Denis Horvat and a lot of new guys from the Afterlife label :)
Q: Describe the most common type of work you do for your clients.
A: Most of my work I do is mastering for labels and producers. But I also try to make everyday music by myself.
I was the Mixing Engineer in this production
- Mastering EngineerAverage price - $30 per song
- Mixing EngineerAverage price - $250 per song
I always have unlimited FREE revisions! We will keep working until the track is 100%. Masterings will be ready in 1-2 days. Contact me for any questions.
- Adam Beyer
- Tale Of Us
- Chlär
- My Ears
- New Service Alert: Kick & Bass Mixing!Mar 29, 2025
Struggling with your low-end? I’m now offering specialized Kick & Bass Mixing for techno, house, and EDM producers. Send me your stems, and I’ll deliver a tight kick, clean bass, and a bonus grouped stem – Started from $30. Message me or to get started!
